https://skylightroofwindow.com Tue, 14 Jul 2026 16:39:48 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://skylightroofwindow.com/universal-skylight-pop-up-roof-sunroof-for-camper-van-boat-horsebox/ https://skylightroofwindow.com/universal-skylight-pop-up-roof-sunroof-for-camper-van-boat-horsebox/#comments Mon, 13 Jul 2026 04:36:44 +0000 https://skylightroofwindow.com/universal-skylight-pop-up-roof-sunroof-for-camper-van-boat-horsebox/








Campervan or boat skylight with a black aluminium frame and privacy glass. Also acts as an emergency exit. The skylight has a pop-up mechanism that can be opened from either side or from both sides at once. Bought for a campervan conversion project, but I changed the design so it was no longer needed. It’s in as-new condition, although the packaging has been opened. More details can be found on the Tropik website: Tropik Universal Premium Skylight.

]]> https://skylightroofwindow.com/universal-skylight-pop-up-roof-sunroof-for-camper-van-boat-horsebox/feed/ 0 https://skylightroofwindow.com/camper-roof-vent-420x420-horsebox-motorhome-shower-hatch-blind-caravan-skylight/ https://skylightroofwindow.com/camper-roof-vent-420x420-horsebox-motorhome-shower-hatch-blind-caravan-skylight/#comments Fri, 10 Jul 2026 04:30:16 +0000 https://skylightroofwindow.com/camper-roof-vent-420x420-horsebox-motorhome-shower-hatch-blind-caravan-skylight/









Camper Roof Vent 420×420 Horsebox Motorhome Shower Hatch Blind Caravan Skylight. Premium quality Roof Vent suitable for spaces which require. Ventilation, comes complete with a built in fan to provide more air movement. Also comes with a. Grade A plastic construction for additonal strength. Vent is BLACK in colour with BLACK Top. Size 42 cm by 42 cm. Hole size Required- 35.5cm by 35.5 cm. Use inteernal cap on top of the roof to draw a template using a pen or felt tip, please ensure you add 5mm extra to the top and left hand side. Secondly cut holes into each of the corners along the template, please ensure that no braces or wiring are not tampred with. Once done check the internal cap will fit, if it is too narrow or tight make incision larger, once concluded sand down any rough edging. Create a wooden frame around the fixture to the depth and finish required, please ensure you take into account your ply and lining. Glue frame with glue and push into place, allow adhesive some time to set. Next screw the internal cap into the timber frame, neatly seal around the top and lip using a sealant. Place the external vent over the lip of the internal cap and mark out the screw holes with a centre punch if needed. Then remove vent from roof and drill all screw hole locations with a 1/16. Pilot hole, and seal with primer paint. NOTE: If installing a power or lighted vent, provide power source of 12 volts DC, using 18-gauge wire. Place putty strips/ Sikaflex flex bead around the opening on roof. (1.27cm) from edge of opening. Be sure putty strips cover entire area to be sealed. Use double layers of putty strip or extra glue if necessary, to seal ribbed areas. Insert vent into the opening. Use an screw driver or nail to locate and line up corner drilled holes with the corner screw holes in vent frame. CAUTION: Install vents with lid hinge side toward front of vehicle. Screw corner screws first to hold vent in place then screw all remaining vent mounting screws. Tighten just enough to compress putty tape. Over-tightening may cause Plastic Base Vents to crack please check prior to doing this. Using the appropriate roof coat for your roof surface, coat screw heads and vent frame edge and seal around the frame if necessary. Saturday and Sunday excluded. Our customer service will try our best to resolve the issue for you. Once we know you have not received your item we will investigate the matter fully both internally and with our carriers. Unfortunately we cannot investigate non receipt deliveries after this time has elapsed. Investigations into lost parcels can take up to 14 days.

]]> https://skylightroofwindow.com/camper-roof-vent-420x420-horsebox-motorhome-shower-hatch-blind-caravan-skylight/feed/ 0 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-3/ https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-3/#comments Sun, 05 Jul 2026 04:08:51 +0000 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-3/









Camper Roof Vent Horsebox Motorhome Shower Hatch Blind Caravan Skylight 420×420. Premium quality Roof Vent suitable for spaces which require. Ventilation, comes complete with a built in fan to provide more air movement. Also comes with a. Grade A plastic construction for additonal strength. Vent is white in colour with White Top. Size 42 cm by 42 cm. Hole size Required- 35.5cm by 35.5 cm. Use inteernal cap on top of the roof to draw a template using a pen or felt tip, please ensure you add 5mm extra to the top and left hand side. Secondly cut holes into each of the corners along the template, please ensure that no braces or wiring are not tampred with. Once done check the internal cap will fit, if it is too narrow or tight make incision larger, once concluded sand down any rough edging. Create a wooden frame around the fixture to the depth and finish required, please ensure you take into account your ply and lining. Glue frame with glue and push into place, allow adhesive some time to set. Next screw the internal cap into the timber frame, neatly seal around the top and lip using a sealant. Place the external vent over the lip of the internal cap and mark out the screw holes with a centre punch if needed. Then remove vent from roof and drill all screw hole locations with a 1/16. Pilot hole, and seal with primer paint. NOTE: If installing a power or lighted vent, provide power source of 12 volts DC, using 18-gauge wire. Place putty strips/ Sikaflex flex bead around the opening on roof. (1.27cm) from edge of opening. Be sure putty strips cover entire area to be sealed. Use double layers of putty strip or extra glue if necessary, to seal ribbed areas. Insert vent into the opening. Use an screw driver or nail to locate and line up corner drilled holes with the corner screw holes in vent frame. CAUTION: Install vents with lid hinge side toward front of vehicle. Screw corner screws first to hold vent in place then screw all remaining vent mounting screws. Tighten just enough to compress putty tape. Over-tightening may cause Plastic Base Vents to crack please check prior to doing this. Using the appropriate roof coat for your roof surface, coat screw heads and vent frame edge and seal around the frame if necessary. Saturday and Sunday excluded. Our customer service will try our best to resolve the issue for you. Once we know you have not received your item we will investigate the matter fully both internally and with our carriers. Unfortunately we cannot investigate non receipt deliveries after this time has elapsed. Investigations into lost parcels can take up to 14 days.

]]> https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-3/feed/ 0 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-2/ https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-2/#comments Fri, 19 Jun 2026 08:13:51 +0000 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-2/









Camper Roof Vent Horsebox Motorhome Shower Hatch Blind Caravan Skylight 420×420. Premium quality Roof Vent suitable for spaces which require. Ventilation, comes complete with a built in fan to provide more air movement. Also comes with a. Grade A plastic construction for additonal strength. Vent is white in colour with White Top. Size 42 cm by 42 cm. Hole size Required- 35.5cm by 35.5 cm. Use inteernal cap on top of the roof to draw a template using a pen or felt tip, please ensure you add 5mm extra to the top and left hand side. Secondly cut holes into each of the corners along the template, please ensure that no braces or wiring are not tampred with. Once done check the internal cap will fit, if it is too narrow or tight make incision larger, once concluded sand down any rough edging. Create a wooden frame around the fixture to the depth and finish required, please ensure you take into account your ply and lining. Glue frame with glue and push into place, allow adhesive some time to set. Next screw the internal cap into the timber frame, neatly seal around the top and lip using a sealant. Place the external vent over the lip of the internal cap and mark out the screw holes with a centre punch if needed. Then remove vent from roof and drill all screw hole locations with a 1/16. Pilot hole, and seal with primer paint. NOTE: If installing a power or lighted vent, provide power source of 12 volts DC, using 18-gauge wire. Place putty strips/ Sikaflex flex bead around the opening on roof. (1.27cm) from edge of opening. Be sure putty strips cover entire area to be sealed. Use double layers of putty strip or extra glue if necessary, to seal ribbed areas. Insert vent into the opening. Use an screw driver or nail to locate and line up corner drilled holes with the corner screw holes in vent frame. CAUTION: Install vents with lid hinge side toward front of vehicle. Screw corner screws first to hold vent in place then screw all remaining vent mounting screws. Tighten just enough to compress putty tape. Over-tightening may cause Plastic Base Vents to crack please check prior to doing this. Using the appropriate roof coat for your roof surface, coat screw heads and vent frame edge and seal around the frame if necessary. Saturday and Sunday excluded. Our customer service will try our best to resolve the issue for you. Once we know you have not received your item we will investigate the matter fully both internally and with our carriers. Unfortunately we cannot investigate non receipt deliveries after this time has elapsed. Investigations into lost parcels can take up to 14 days.

]]> https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420-2/feed/ 0 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-420x420-caravan-skylight-2/ https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-420x420-caravan-skylight-2/#comments Thu, 23 Apr 2026 17:52:47 +0000 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-420x420-caravan-skylight-2/


Camper Roof Vent Horsebox Motorhome Shower Hatch Blind 420×420 Caravan Skylight. Premium quality Roof Vent suitable for spaces which require. Ventilation, comes complete with a built in fan to provide more air movement. Also comes with a. Grade A plastic construction for additonal strength. Available in black and white. Size 42 cm by 42 cm. Hole size Required- 35.5cm by 35.5 cm. Use inteernal cap on top of the roof to draw a template using a pen or felt tip, please ensure you add 5mm extra to the top and left hand side. Secondly cut holes into each of the corners along the template, please ensure that no braces or wiring are not tampred with. Once done check the internal cap will fit, if it is too narrow or tight make incision larger, once concluded sand down any rough edging. Create a wooden frame around the fixture to the depth and finish required, please ensure you take into account your ply and lining. Glue frame with glue and push into place, allow adhesive some time to set. Next screw the internal cap into the timber frame, neatly seal around the top and lip using a sealant. Place the external vent over the lip of the internal cap and mark out the screw holes with a centre punch if needed. Then remove vent from roof and drill all screw hole locations with a 1/16. Pilot hole, and seal with primer paint. NOTE: If installing a power or lighted vent, provide power source of 12 volts DC, using 18-gauge wire. Place putty strips/ Sikaflex flex bead around the opening on roof. (1.27cm) from edge of opening. Be sure putty strips cover entire area to be sealed. Use double layers of putty strip or extra glue if necessary, to seal ribbed areas. Insert vent into the opening. Use an screw driver or nail to locate and line up corner drilled holes with the corner screw holes in vent frame. CAUTION: Install vents with lid hinge side toward front of vehicle. Screw corner screws first to hold vent in place then screw all remaining vent mounting screws. Tighten just enough to compress putty tape. Over-tightening may cause Plastic Base Vents to crack please check prior to doing this. Using the appropriate roof coat for your roof surface, coat screw heads and vent frame edge and seal around the frame if necessary. Saturday and Sunday excluded. Our customer service will try our best to resolve the issue for you. Once we know you have not received your item we will investigate the matter fully both internally and with our carriers. Unfortunately we cannot investigate non receipt deliveries after this time has elapsed. Investigations into lost parcels can take up to 14 days.

]]> https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-420x420-caravan-skylight-2/feed/ 0 https://skylightroofwindow.com/skymaxx-lx-plus-rooflight-maxxair-skylight-500x700-horsebox-42-60mm-led/ https://skylightroofwindow.com/skymaxx-lx-plus-rooflight-maxxair-skylight-500x700-horsebox-42-60mm-led/#comments Mon, 06 Apr 2026 17:18:44 +0000 https://skylightroofwindow.com/skymaxx-lx-plus-rooflight-maxxair-skylight-500x700-horsebox-42-60mm-led/











Skymaxx LX plus (led) 50cm x 70cm (500MM X 700MM) rooflight / skylight made by the popular Maxxair Airxcel brand. NON LED version is the Skymaxx LX also in our shop. The Skymaxx LX PLUS rooflight is a really cleverly designed product. These replace Dometic’s midi heki’s and can be vented and non vented. Fits roof gap from 42-60mm! Also by having interchangeable panels they can. Be both vented and non vented! MAXXAIR has come up with the ideal solution. Manual lift with 3 open positions. Pleated screen and blind provides option of full sun, full shade or partial shade/sun. SkyMaxx LX fits 500 x 700mm roof opening. With 12v LED lights incorporated int he frame (12v DC 2amp). Forced and non-forced ventilation. For 42mm to 60mm Roof thickness, no cutting or adapters required. CE and R43 approval. We specialize in products for the self build motorhome, conversion builder. Our rates will be hard to beat by any other. We provide the following. Dometic, Thule and Fiamma Awnings for panel vans, caravans and coachbuilt Motorhomes. Clutch claw pedal lock security to Protect your leisure vehicle. Full Range of Dometic products such as Seitz S4 S5 windows, Smev Sink & Hobs, Smev Ovens. Huge Range of fridges from compressor fridges, 3 way, 12-24v, including the ever popular CRX-50 AND THETFORD T1090. Sargent power managements including the EC160 which is a conversion favourite. 4 Way stretch carpet, fixings and adhesives such as contact spray and Sika. Skylight/Rooflights from Heki to Maxxair. Morland furniture boards 15mm 8x4ft. T Trim, Door locker trim, push buttons, hindges, and stays, Altro Flooring. Toilets, ovens, 12v tvs, led lighting plus many more. Full range of airconditioning units from Dometic, Truma and Coleman.

]]> https://skylightroofwindow.com/skymaxx-lx-plus-rooflight-maxxair-skylight-500x700-horsebox-42-60mm-led/feed/ 0 https://skylightroofwindow.com/motorhome-campervan-horsebox-roof-vent-skylight-420mm-x-420-sano-white/ https://skylightroofwindow.com/motorhome-campervan-horsebox-roof-vent-skylight-420mm-x-420-sano-white/#comments Tue, 10 Mar 2026 16:21:49 +0000 https://skylightroofwindow.com/motorhome-campervan-horsebox-roof-vent-skylight-420mm-x-420-sano-white/





Premium quality Roof Vent suitable for spaces which require. Ventilation, comes complete with a built in fan to provide more air movement. Also comes with a. Grade A plastic construction for additonal strength. Vent is white in colour with White Top. Size 42 cm by 42 cm. Hole size Required- 35.5cm by 35.5 cm. Instructions to fit: 1. Use inteernal cap on top of the roof to draw a template using a pen or felt tip, please ensure you add 5mm extra to the top and left hand side. Secondly cut holes into each of the corners along the template, please ensure that no braces or wiring are not tampred with. Once done check the internal cap will fit, if it is too narrow or tight make incision larger, once concluded sand down any rough edging. Create a wooden frame around the fixture to the depth and finish required, please ensure you take into account your ply and lining. Glue frame with glue and push into place, allow adhesive some time to set. Next screw the internal cap into the timber frame, neatly seal around the top and lip using a sealant. Place the external vent over the lip of the internal cap and mark out the screw holes with a centre punch if needed. Then remove vent from roof and drill all screw hole locations with a 1/16” pilot hole, and seal with primer paint. NOTE: If installing a power or lighted vent, provide power source of 12 volts DC, using 18-gauge wire. Place putty strips/ Sikaflex flex bead around the opening on roof ½” (1.27cm) from edge of opening. Be sure putty strips cover entire area to be sealed. Use double layers of putty strip or extra glue if necessary, to seal ribbed areas. Insert vent into the opening. Use an screw driver or nail to locate and line up corner drilled holes with the corner screw holes in vent frame. CAUTION: Install vents with lid hinge side toward front of vehicle. Screw corner screws first to hold vent in place then screw all remaining vent mounting screws. Tighten just enough to compress putty tape. Over-tightening may cause Plastic Base Vents to crack please check prior to doing this. Using the appropriate roof coat for your roof surface, coat screw heads and vent frame edge and seal around the frame if necessary. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

]]> https://skylightroofwindow.com/motorhome-campervan-horsebox-roof-vent-skylight-420mm-x-420-sano-white/feed/ 0 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420/ https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420/#comments Mon, 09 Feb 2026 16:21:49 +0000 https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420/









Camper Roof Vent Horsebox Motorhome Shower Hatch Blind Caravan Skylight 420×420. Premium quality Roof Vent suitable for spaces which require. Ventilation, comes complete with a built in fan to provide more air movement. Also comes with a. Grade A plastic construction for additonal strength. Vent is white in colour with White Top. Size 42 cm by 42 cm. Hole size Required- 35.5cm by 35.5 cm. Use inteernal cap on top of the roof to draw a template using a pen or felt tip, please ensure you add 5mm extra to the top and left hand side. Secondly cut holes into each of the corners along the template, please ensure that no braces or wiring are not tampred with. Once done check the internal cap will fit, if it is too narrow or tight make incision larger, once concluded sand down any rough edging. Create a wooden frame around the fixture to the depth and finish required, please ensure you take into account your ply and lining. Glue frame with glue and push into place, allow adhesive some time to set. Next screw the internal cap into the timber frame, neatly seal around the top and lip using a sealant. Place the external vent over the lip of the internal cap and mark out the screw holes with a centre punch if needed. Then remove vent from roof and drill all screw hole locations with a 1/16. Pilot hole, and seal with primer paint. NOTE: If installing a power or lighted vent, provide power source of 12 volts DC, using 18-gauge wire. Place putty strips/ Sikaflex flex bead around the opening on roof. (1.27cm) from edge of opening. Be sure putty strips cover entire area to be sealed. Use double layers of putty strip or extra glue if necessary, to seal ribbed areas. Insert vent into the opening. Use an screw driver or nail to locate and line up corner drilled holes with the corner screw holes in vent frame. CAUTION: Install vents with lid hinge side toward front of vehicle. Screw corner screws first to hold vent in place then screw all remaining vent mounting screws. Tighten just enough to compress putty tape. Over-tightening may cause Plastic Base Vents to crack please check prior to doing this. Using the appropriate roof coat for your roof surface, coat screw heads and vent frame edge and seal around the frame if necessary. Saturday and Sunday excluded. Our customer service will try our best to resolve the issue for you. Once we know you have not received your item we will investigate the matter fully both internally and with our carriers. Unfortunately we cannot investigate non receipt deliveries after this time has elapsed. Investigations into lost parcels can take up to 14 days.

]]> https://skylightroofwindow.com/camper-roof-vent-horsebox-motorhome-shower-hatch-blind-caravan-skylight-420x420/feed/ 0 https://skylightroofwindow.com/sky-light-dome-motorhome-campervan-horsebox-roof-vent-skylight-500mm-x500-black-2/ https://skylightroofwindow.com/sky-light-dome-motorhome-campervan-horsebox-roof-vent-skylight-500mm-x500-black-2/#comments Sun, 14 Dec 2025 14:04:47 +0000 https://skylightroofwindow.com/sky-light-dome-motorhome-campervan-horsebox-roof-vent-skylight-500mm-x500-black-2/










The Sky Light Dome Motorhome Campervan Horsebox Roof Vent Skylight by Shield is a essential addition to any campervan or caravan. With a cut out size of 402mm x 402mm and dimensions of 50cm x 50cm, this lockable skylight provides natural light and ventilation while also offering privacy. Made for motorhomes and caravans, this roof vent skylight is a practical and stylish choice for any traveller looking to brighten up their living space while on the road.

]]> https://skylightroofwindow.com/sky-light-dome-motorhome-campervan-horsebox-roof-vent-skylight-500mm-x500-black-2/feed/ 0 https://skylightroofwindow.com/remis-streamline-rooflight-400-x-400-campervan-motorhome-horsebox-skylight/ https://skylightroofwindow.com/remis-streamline-rooflight-400-x-400-campervan-motorhome-horsebox-skylight/#comments Thu, 11 Dec 2025 01:57:43 +0000 https://skylightroofwindow.com/remis-streamline-rooflight-400-x-400-campervan-motorhome-horsebox-skylight/






40×40 model (Perspex slightly larger). Includes both outer and inner sections Comes with blackout blind and fly screen. Cleaned and in working order. This is a used unit. Unit has some glue residue on the external mating surface, but could be removed / sealed over. Fly screen needs a clip to be functional, slight crazing to the Perspex on a few areas and 1 hole cover missing.

]]> https://skylightroofwindow.com/remis-streamline-rooflight-400-x-400-campervan-motorhome-horsebox-skylight/feed/ 0