https://skylightroofwindow.com Tue, 16 Jun 2026 20:07:52 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://skylightroofwindow.com/skylight-flat-rooflights-open-skylight-roof-lanterns-lean-to-roof/ https://skylightroofwindow.com/skylight-flat-rooflights-open-skylight-roof-lanterns-lean-to-roof/#comments Sun, 08 Feb 2026 16:19:44 +0000 https://skylightroofwindow.com/skylight-flat-rooflights-open-skylight-roof-lanterns-lean-to-roof/









The Skylight is a modern, stylish roof window designed for new construction projects. Made with fully tempered glass, it offers a clear interior and exterior view. Perfect for DIY enthusiasts looking to enhance their home with a sleek and functional addition.

]]> https://skylightroofwindow.com/skylight-flat-rooflights-open-skylight-roof-lanterns-lean-to-roof/feed/ 0 https://skylightroofwindow.com/premium-regular-roof-lanterns-6-pane-brett-martin-all-sizes/ https://skylightroofwindow.com/premium-regular-roof-lanterns-6-pane-brett-martin-all-sizes/#comments Thu, 29 May 2025 10:53:47 +0000 https://skylightroofwindow.com/premium-regular-roof-lanterns-6-pane-brett-martin-all-sizes/








This slim and elegant glass roof lantern makes an architectural statement, and floods interior spaces with natural daylight. Designed for quick and easy installation, and with a laminated inner pane as standard for the safety of those below, it makes a stunning addition to living and working spaces. The Brett Martin Roof Lantern is designed not only to look better but also to perform better. Safety is prioritised as lanterns are supplied only with laminated inner panes for enhanced protection from falling objects from above. The slimline profiles work with thermally efficient double glazed units and this, together with a simplified installation process, delivers a low maintenance, weathertight solution. Available in 9 standard sizes. Choice of clear self-clean or blue solar-control self-clean glass as standard. Special glass options also available. 4 panes of glass as standard for a contemporary look, with the option of 6 panes for a more classic aesthetic. Aluminium frame powder coated to RAL 7016 grey externally and RAL 9010 white internally. Designed for simple mounting direct to a weathered builder’s upstand. Stylish glass rooflight with slender aluminium frame offering clean sight lines and neat junctions. Designed for rapid installation with no silicone sealant other than to seal between roof and rooflight. Brett Martin Roof Lantern rooflights are intended for installation onto a fully weathered and insulated builders upstand on flat and low pitch roofs. The surface of flat roofs normally require some degree of pitch to ensure adequate water runoff. For aesthetic reasons we recommend that the upstand is built with 0° pitch i. Not parallel with the pitched roof surface. The rooflight can accommodate being installed on an upstand with a pitch of up to 5° but please note that this will likely result in a’lopsided’ appearance. Measuring Guide for fitting to builders upstand. Measure external builders upstand Acceptable tolerance = rooflight size +20/-0mm. Construct finished, insulated and weathered builders upstand to dimensions above. NB there should be no excessive build up of layers, the top surface should be level and free from protrusions or projections which may prevent adequate weatherproofing. WHY TO CHOOSE US. You’ll never have to worry about the quality again. Best Value For Everyone. Our low pricing means that you can order at competitive prices, whether you are a trade or not. Our own drivers deliver within London (M25) in order to guarantee the safe arrival of all our products. Please be aware that as our drivers are alone and pre-loaded in our warehouse, we will require you or your builders to be on-site for the acceptance of all orders. Some of these companies may not have the correct vans in place and might not be able to deliver to your door, so we might have to ask you to pick it up from the local depot (usually within 20 min drive) however this is rare. Most of our products weigh a considerable amount varying from 10kg to 280kg, therefore it may need more than two, four, or even six people to unload depending on the size and weight of your product. We will not accept liability for any broken skylights during the unloading process, as it is down to the customer to organise this process. If no contact is made, we will have no option but to return your product to our warehouse. Please note that our Regular Roof Lanterns are made to order. This means that each lantern is uniquely designed and manufactured according to your exact specifications. As a result, we regret to inform you that these products are non-refundable. Weatherproofing Sealant (Silicon) – DOWSILT 791, 310ml – Skylight- Roof light. Skylight Roof Light Glass window Roof Lantern 800 x 1800 mm Triple Glazed. Flat Roof window 600 x 3000mm Skylight rooflight roof light roof lantern.

]]> https://skylightroofwindow.com/premium-regular-roof-lanterns-6-pane-brett-martin-all-sizes/feed/ 0 https://skylightroofwindow.com/premium-rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made/ https://skylightroofwindow.com/premium-rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made/#comments Sun, 31 Mar 2024 19:40:16 +0000 https://skylightroofwindow.com/premium-rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made/













UK Made & Designed. Description, Measuring & Fitting. Company/Brand name: Rooflights & Roof Lanterns. Sizes Advertises on this listing. All sizes are the top pane glass of the rooflight. The internal bottom pane of glass will be 100mm smaller all around. (Internal size of structural opening 810mm x 1810mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 810mm x 1310mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 710mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 1010mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. Each rooflight that we supply can be conveniently installed on an insulated upstand coupled with an anodized aluminium angle trim, which your roofer/builder can provide. Any installation-related diagrams and information you see on this page is for general guidance purposes only as each project can vary in terms of design and construction according to the architect’s drawings. Furthermore, upstand dimensions and design may also vary based on the architect’s drawings and insulation specifications. However, your rooflight may be custom-designed at an additional cost to suit wider upstands featuring larger than 100mm overhangs, should you require. General Installation and Measurement Guidelines. RLRL flat rooflights are very easy to install by a competent roofer or builder. Below, you’ll find a simple fitting guide explaining each step. You can find us online, our companies name is Rooflights & Roof Lanterns. How to measure the opening. It is recommended that at least 5mm tolerances should be allowed all around the structural opening in order to let the rooflight’s bottom pane fit effortlessly into the opening. The bottom pane of glass will be 100mm smaller all around which would make the bottom pane 800mm x 800mm. You would make the structural opening 810mm x 810, upstand width up to 65mm wide and height 150mm high in this example. For all standard rooflight units, the top pane has a black 100mm boarder and a 100mm overhang all around. The top pane can be made bigger for bigger upstand width if required at an additional cost. For this size skylight the bottom pane that slots into the structural opening will be 100mm smaller all around making it 800mm x 1800mm which means your structural opening should be 810mm x 1810mm. Upstand width should be up to 65mm wide and 150mm high, allowing a 35mm lip on each side of the top pane as per diagram below. The diagram below should give you further insights. How to prepare your roof. The skylight IGU is secured onto a timber kerb which will be prepared by your roofer or builder as part of the flat roof construction process. It’s important for the timber upstand to protrude at least 150mm above the roof. Ensure that the pitch is at least 5? , which is deemed sufficient to allow water to flow down easily and prevent water pooling on top of the glass. How to install your rooflight. The last step required to finish the roof before you can install your roof light is to apply a roof covering to the upstand’s side, which makes it weatherproof (illustration below). Just to quickly reiterate, it’s important to get the timber upstand protrude by at least 150mm above the roof – the pitch should be 5? , allowing rainwater to flow down with ease. Before sealing the product with silicone, water can be applied to test the flow off of water, if pooling occurs a higher pitch may be required. If the self-clean option is selected, please note it works more effectively at pitches of 10 degrees and above. Apply a reasonable amount of low modulus silicone to the Upstand’s top part according to the silicone supplier’s data sheet, after which you can place the top pane rooflight onto the top of the upstand. Apply pressure all around the 100mm overhang so that the silicone spreads evenly and seals any gaps. Finish the silicone with a silicone finishing tool. Next, the bottom pane needs to be supported on all four sides after it is set in place with the aluminium angle fitted and bonded prior to the plasterboard. Secure the aluminium angle to the timber structure. Apply compatible structural silicone between the bottom aluminium angle trim’s surfaces and the bottom pane of glass according to the supplier’s data sheet, and firmly secure into place. Wipe away any excess silicone using a finishing tool. The aluminium angle can then covered with plasterboard. The bottom and top panes of glass at this stage are fully supported. Only sealants compatible with the top of the upstand, glass, aluminium angle trim and setting blocks should be used. Sealants used should be compatible with Dowsil 3363. Dowsil 791 low modulus weather proofing silicone and Dowsil 895 Structural sealant are compatible with Dowsil 3363. Some sealant suppliers may require primer to be applied to surfaces. Recommended lift per person is 25kg. We recommend arranging equipment and installation after the item has been delivered. Unfortunately, we can only deliver this product to the locations below. London, Essex, Kent, East Sussex, West Sussex, Hampshire, Gloucestershire, Surrey, Buckinghamshire, Oxfordshire, Middlesex, Hertfordshire, Bedfordshire, Northamptonshire, Leicestershire, Warwickshire, West Midlands, Nottinghamshire, Suffolk, Derbyshire, Cardiff, Cambridgeshire, Devon, Somerset, East Riding, Lincolnshire, Norfolk, Cheshire, Merseyside, Greater Manchester, south Yorkshire, Staffordshire, Rutland, Wiltshire, Worcester, Herefordshire, West Yorkshire (BD, LS, WF, HX, HD), Dorset. CM, CO, CR, CT, CV, DA, E, EC1, EN, GL, GU, HA, HP, IG, KT, LE, LU, ME, MK, N, NN, NP, NW, OX, PE, RH, RG, RM, SG, SL, SN, SM, SE, SO, SP, SW, PO (exc Isle of White), TN, TW, B, BH, BN, BR, BS, W, WD, WS, WV, UB, AL, BA, WC1, IP, NG, CB, CF, DE, LS, WF, HX, HD, BL, CH, CW, DN, DT, DY, EX, HD, HR, HU, HX, L, LN, LS, M, NR, OL, S, SS, SK, ST, TA, TF, WA, WF, WN, WR, BD1, BD10, BD15, BD13 , BD14, BD12, BD11, BD19, BD2, BD3, BD4, BD5, BD6, BD7, BD8, BD9 , BD16, BD17. For deliveries outside of this area please see all other products on our website which we can deliver nationwide. Please ensure you check we’re able to deliver to your postcode before proceeding. Only orders that have not yet been dispatched can be cancelled. If the order has already been dispatched we will not be able to cancel.

]]> https://skylightroofwindow.com/premium-rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made/feed/ 0 https://skylightroofwindow.com/rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made-warranty/ https://skylightroofwindow.com/rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made-warranty/#comments Mon, 25 Mar 2024 18:57:12 +0000 https://skylightroofwindow.com/rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made-warranty/













UK Made & Designed. Description, Measuring & Fitting. Company/Brand name: Rooflights & Roof Lanterns. Sizes Advertises on this listing. All sizes are the top pane glass of the rooflight. The internal bottom pane of glass will be 100mm smaller all around. (Internal size of structural opening 810mm x 1810mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 810mm x 1310mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 710mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 1010mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. Each rooflight that we supply can be conveniently installed on an insulated upstand coupled with an anodized aluminium angle trim, which your roofer/builder can provide. Any installation-related diagrams and information you see on this page is for general guidance purposes only as each project can vary in terms of design and construction according to the architect’s drawings. Furthermore, upstand dimensions and design may also vary based on the architect’s drawings and insulation specifications. However, your rooflight may be custom-designed at an additional cost to suit wider upstands featuring larger than 100mm overhangs, should you require. General Installation and Measurement Guidelines. RLRL flat rooflights are very easy to install by a competent roofer or builder. Below, you’ll find a simple fitting guide explaining each step. You can find us online, our companies name is Rooflights & Roof Lanterns. How to measure the opening. It is recommended that at least 5mm tolerances should be allowed all around the structural opening in order to let the rooflight’s bottom pane fit effortlessly into the opening. The bottom pane of glass will be 100mm smaller all around which would make the bottom pane 800mm x 800mm. You would make the structural opening 810mm x 810, upstand width up to 65mm wide and height 150mm high in this example. For all standard rooflight units, the top pane has a black 100mm boarder and a 100mm overhang all around. The top pane can be made bigger for bigger upstand width if required at an additional cost. For this size skylight the bottom pane that slots into the structural opening will be 100mm smaller all around making it 800mm x 1800mm which means your structural opening should be 810mm x 1810mm. Upstand width should be up to 65mm wide and 150mm high, allowing a 35mm lip on each side of the top pane as per diagram below. The diagram below should give you further insights. How to prepare your roof. The skylight IGU is secured onto a timber kerb which will be prepared by your roofer or builder as part of the flat roof construction process. It’s important for the timber upstand to protrude at least 150mm above the roof. Ensure that the pitch is at least 5? , which is deemed sufficient to allow water to flow down easily and prevent water pooling on top of the glass. How to install your rooflight. The last step required to finish the roof before you can install your roof light is to apply a roof covering to the upstand’s side, which makes it weatherproof (illustration below). Just to quickly reiterate, it’s important to get the timber upstand protrude by at least 150mm above the roof – the pitch should be 5? , allowing rainwater to flow down with ease. Before sealing the product with silicone, water can be applied to test the flow off of water, if pooling occurs a higher pitch may be required. If the self-clean option is selected, please note it works more effectively at pitches of 10 degrees and above. Apply a reasonable amount of low modulus silicone to the Upstand’s top part according to the silicone supplier’s data sheet, after which you can place the top pane rooflight onto the top of the upstand. Apply pressure all around the 100mm overhang so that the silicone spreads evenly and seals any gaps. Finish the silicone with a silicone finishing tool. Next, the bottom pane needs to be supported on all four sides after it is set in place with the aluminium angle fitted and bonded prior to the plasterboard. Secure the aluminium angle to the timber structure. Apply compatible structural silicone between the bottom aluminium angle trim’s surfaces and the bottom pane of glass according to the supplier’s data sheet, and firmly secure into place. Wipe away any excess silicone using a finishing tool. The aluminium angle can then covered with plasterboard. The bottom and top panes of glass at this stage are fully supported. Only sealants compatible with the top of the upstand, glass, aluminium angle trim and setting blocks should be used. Sealants used should be compatible with Dowsil 3363. Dowsil 791 low modulus weather proofing silicone and Dowsil 895 Structural sealant are compatible with Dowsil 3363. Some sealant suppliers may require primer to be applied to surfaces. Recommended lift per person is 25kg. We recommend arranging equipment and installation after the item has been delivered. Unfortunately, we can only deliver this product to the locations below. London, Essex, Kent, East Sussex, West Sussex, Hampshire, Gloucestershire, Surrey, Buckinghamshire, Oxfordshire, Middlesex, Hertfordshire, Bedfordshire, Northamptonshire, Leicestershire, Warwickshire, West Midlands, Nottinghamshire, Suffolk, Derbyshire, Cardiff, Cambridgeshire, Devon, Somerset, East Riding, Lincolnshire, Norfolk, Cheshire, Merseyside, Greater Manchester, south Yorkshire, Staffordshire, Rutland, Wiltshire, Worcester, Herefordshire, West Yorkshire (BD, LS, WF, HX, HD), Dorset. CM, CO, CR, CT, CV, DA, E, EC1, EN, GL, GU, HA, HP, IG, KT, LE, LU, ME, MK, N, NN, NP, NW, OX, PE, RH, RG, RM, SG, SL, SN, SM, SE, SO, SP, SW, PO (exc Isle of White), TN, TW, B, BH, BN, BR, BS, W, WD, WS, WV, UB, AL, BA, WC1, IP, NG, CB, CF, DE, LS, WF, HX, HD, BL, CH, CW, DN, DT, DY, EX, HD, HR, HU, HX, L, LN, LS, M, NR, OL, S, SS, SK, ST, TA, TF, WA, WF, WN, WR, BD1, BD10, BD15, BD13 , BD14, BD12, BD11, BD19, BD2, BD3, BD4, BD5, BD6, BD7, BD8, BD9 , BD16, BD17. For deliveries outside of this area please see all other products on our website which we can deliver nationwide. Please ensure you check we’re able to deliver to your postcode before proceeding. Only orders that have not yet been dispatched can be cancelled. If the order has already been dispatched we will not be able to cancel.

]]> https://skylightroofwindow.com/rooflights-1000mm-x-2000mm-skylights-roof-lanterns-uk-made-warranty/feed/ 0 https://skylightroofwindow.com/luxury-roof-lanterns-rooflights-flat-roof-skylights-uk-made-warranty/ https://skylightroofwindow.com/luxury-roof-lanterns-rooflights-flat-roof-skylights-uk-made-warranty/#comments Fri, 17 Feb 2023 15:39:09 +0000 https://skylightroofwindow.com/luxury-roof-lanterns-rooflights-flat-roof-skylights-uk-made-warranty/













UK Made & Designed. Description, Measuring & Fitting. Company/Brand name: Rooflights & Roof Lanterns. Sizes Advertises on this listing. All sizes are the top pane glass of the rooflight. The internal bottom pane of glass will be 100mm smaller all around. (Internal size of structural opening 810mm x 1810mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 810mm x 1310mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 710mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 1010mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. Each rooflight that we supply can be conveniently installed on an insulated upstand coupled with an anodized aluminium angle trim, which your roofer/builder can provide. Any installation-related diagrams and information you see on this page is for general guidance purposes only as each project can vary in terms of design and construction according to the architect’s drawings. Furthermore, upstand dimensions and design may also vary based on the architect’s drawings and insulation specifications. However, your rooflight may be custom-designed at an additional cost to suit wider upstands featuring larger than 100mm overhangs, should you require. General Installation and Measurement Guidelines. RLRL flat rooflights are very easy to install by a competent roofer or builder. Below, you’ll find a simple fitting guide explaining each step. You can find us online, our companies name is Rooflights & Roof Lanterns. How to measure the opening. It is recommended that at least 5mm tolerances should be allowed all around the structural opening in order to let the rooflight’s bottom pane fit effortlessly into the opening. The bottom pane of glass will be 100mm smaller all around which would make the bottom pane 800mm x 800mm. You would make the structural opening 810mm x 810, upstand width up to 65mm wide and height 150mm high in this example. For all standard rooflight units, the top pane has a black 100mm boarder and a 100mm overhang all around. The top pane can be made bigger for bigger upstand width if required at an additional cost. For this size skylight the bottom pane that slots into the structural opening will be 100mm smaller all around making it 800mm x 1800mm which means your structural opening should be 810mm x 1810mm. Upstand width should be up to 65mm wide and 150mm high, allowing a 35mm lip on each side of the top pane as per diagram below. The diagram below should give you further insights. How to prepare your roof. The skylight IGU is secured onto a timber kerb which will be prepared by your roofer or builder as part of the flat roof construction process. It’s important for the timber upstand to protrude at least 150mm above the roof. Ensure that the pitch is at least 5? Which is deemed sufficient to allow water to flow down easily and prevent water pooling on top of the glass. How to install your rooflight. The last step required to finish the roof before you can install your roof light is to apply a roof covering to the upstand’s side, which makes it weatherproof (illustration below). Just to quickly reiterate, it’s important to get the timber upstand protrude by at least 150mm above the roof – the pitch should be 5? Allowing rainwater to flow down with ease. Before sealing the product with silicone, water can be applied to test the flow off of water, if pooling occurs a higher pitch may be required. If the self-clean option is selected, please note it works more effectively at pitches of 10 degrees and above. Apply a reasonable amount of low modulus silicone to the Upstand’s top part according to the silicone supplier’s data sheet, after which you can place the top pane rooflight onto the top of the upstand. Apply pressure all around the 100mm overhang so that the silicone spreads evenly and seals any gaps. Finish the silicone with a silicone finishing tool. Next, the bottom pane needs to be supported on all four sides after it is set in place with the aluminium angle fitted and bonded prior to the plasterboard. Secure the aluminium angle to the timber structure. Apply compatible structural silicone between the bottom aluminium angle trim’s surfaces and the bottom pane of glass according to the supplier’s data sheet, and firmly secure into place. Wipe away any excess silicone using a finishing tool. The aluminium angle can then covered with plasterboard. The bottom and top panes of glass at this stage are fully supported. Only sealants compatible with the top of the upstand, glass, aluminium angle trim and setting blocks should be used. Sealants used should be compatible with Dowsil 3363. Dowsil 791 low modulus weather proofing silicone and Dowsil 895 Structural sealant are compatible with Dowsil 3363. Some sealant suppliers may require primer to be applied to surfaces. Recommended lift per person is 25kg. We recommend arranging equipment and installation after the item has been delivered. Unfortunately, we can only deliver this product to the locations below. London, Essex, Kent, East Sussex, West Sussex, Hampshire, Gloucestershire, Surrey, Buckinghamshire, Oxfordshire, Middlesex, Hertfordshire, Bedfordshire, Northamptonshire, Leicestershire, Warwickshire, West Midlands, Nottinghamshire, Suffolk, Derbyshire, Cardiff, Cambridgeshire, Devon, Somerset, East Riding, Lincolnshire, Norfolk, Cheshire, Merseyside, Greater Manchester, south Yorkshire, Staffordshire, Rutland, Wiltshire, Worcester, Herefordshire, West Yorkshire (BD, LS, WF, HX, HD), Dorset. CM, CO, CR, CT, CV, DA, E, EC1, EN, GL, GU, HA, HP, IG, KT, LE, LU, ME, MK, N, NN, NP, NW, OX, PE, RH, RG, RM, SG, SL, SN, SM, SE, SO, SP, SW, PO (exc Isle of White), TN, TW, B, BH, BN, BR, BS, W, WD, WS, WV, UB, AL, BA, WC1, IP, NG, CB, CF, DE, LS, WF, HX, HD, BL, CH, CW, DN, DT, DY, EX, HD, HR, HU, HX, L, LN, LS, M, NR, OL, S, SS, SK, ST, TA, TF, WA, WF, WN, WR, BD1, BD10, BD15, BD13, BD14, BD12, BD11, BD19, BD2, BD3, BD4, BD5, BD6, BD7, BD8, BD9, BD16, BD17. For deliveries outside of this area please see all other products on our website which we can deliver nationwide. Please ensure you check we’re able to deliver to your postcode before proceeding. Only orders that have not yet been dispatched can be cancelled. If the order has already been dispatched we will not be able to cancel. This item is in the category “Home, Furniture & DIY\DIY Materials\Windows & Window Hardware\Home Windows”. The seller is “roof-lanterns-and-rooflights” and is located in this country: GB. This item can be shipped to United Kingdom.

• flat rooflight size: 600 x 900mm
• Window Style: Glazed
• Brand: Skylights & Roof Windows
• Unit Type: Unit
• Float Glass Manufacturer: Pilkington K Glass
• Custom Bundle: No
• Main Colour: Clear with black boarder
• Material: Toughened Glass Skylight
• MPN: 222569063615
• Country/Region of Manufacture: United Kingdom
• Unit Quantity: each
• Modified Item: No

]]> https://skylightroofwindow.com/luxury-roof-lanterns-rooflights-flat-roof-skylights-uk-made-warranty/feed/ 0 https://skylightroofwindow.com/skylights-rooflights-roof-lanterns-uk-made-warranty-db-glazed/ https://skylightroofwindow.com/skylights-rooflights-roof-lanterns-uk-made-warranty-db-glazed/#comments Sat, 11 Feb 2023 03:23:08 +0000 https://skylightroofwindow.com/skylights-rooflights-roof-lanterns-uk-made-warranty-db-glazed/













UK Made & Designed. Description, Measuring & Fitting. Company/Brand name: Rooflights & Roof Lanterns. Sizes Advertises on this listing. All sizes are the top pane glass of the rooflight. The internal bottom pane of glass will be 100mm smaller all around. (Internal size of structural opening 810mm x 1810mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 810mm x 1310mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 710mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. (Internal size of structural opening 410mm x 1010mm to allow the bottom pane to slot in smoothly with sufficient tolerance) Upstand made by builder on site: width up to 65mm wide and 150mm high. Each rooflight that we supply can be conveniently installed on an insulated upstand coupled with an anodized aluminium angle trim, which your roofer/builder can provide. Any installation-related diagrams and information you see on this page is for general guidance purposes only as each project can vary in terms of design and construction according to the architect’s drawings. Furthermore, upstand dimensions and design may also vary based on the architect’s drawings and insulation specifications. However, your rooflight may be custom-designed at an additional cost to suit wider upstands featuring larger than 100mm overhangs, should you require. General Installation and Measurement Guidelines. RLRL flat rooflights are very easy to install by a competent roofer or builder. Below, you’ll find a simple fitting guide explaining each step. You can find us online, our companies name is Rooflights & Roof Lanterns. How to measure the opening. It is recommended that at least 5mm tolerances should be allowed all around the structural opening in order to let the rooflight’s bottom pane fit effortlessly into the opening. The bottom pane of glass will be 100mm smaller all around which would make the bottom pane 800mm x 800mm. You would make the structural opening 810mm x 810, upstand width up to 65mm wide and height 150mm high in this example. For all standard rooflight units, the top pane has a black 100mm boarder and a 100mm overhang all around. The top pane can be made bigger for bigger upstand width if required at an additional cost. For this size skylight the bottom pane that slots into the structural opening will be 100mm smaller all around making it 800mm x 1800mm which means your structural opening should be 810mm x 1810mm. Upstand width should be up to 65mm wide and 150mm high, allowing a 35mm lip on each side of the top pane as per diagram below. The diagram below should give you further insights. How to prepare your roof. The skylight IGU is secured onto a timber kerb which will be prepared by your roofer or builder as part of the flat roof construction process. It’s important for the timber upstand to protrude at least 150mm above the roof. Ensure that the pitch is at least 5? Which is deemed sufficient to allow water to flow down easily and prevent water pooling on top of the glass. How to install your rooflight. The last step required to finish the roof before you can install your roof light is to apply a roof covering to the upstand’s side, which makes it weatherproof (illustration below). Just to quickly reiterate, it’s important to get the timber upstand protrude by at least 150mm above the roof – the pitch should be 5? Allowing rainwater to flow down with ease. Before sealing the product with silicone, water can be applied to test the flow off of water, if pooling occurs a higher pitch may be required. If the self-clean option is selected, please note it works more effectively at pitches of 10 degrees and above. Apply a reasonable amount of low modulus silicone to the Upstand’s top part according to the silicone supplier’s data sheet, after which you can place the top pane rooflight onto the top of the upstand. Apply pressure all around the 100mm overhang so that the silicone spreads evenly and seals any gaps. Finish the silicone with a silicone finishing tool. Next, the bottom pane needs to be supported on all four sides after it is set in place with the aluminium angle fitted and bonded prior to the plasterboard. Secure the aluminium angle to the timber structure. Apply compatible structural silicone between the bottom aluminium angle trim’s surfaces and the bottom pane of glass according to the supplier’s data sheet, and firmly secure into place. Wipe away any excess silicone using a finishing tool. The aluminium angle can then covered with plasterboard. The bottom and top panes of glass at this stage are fully supported. Only sealants compatible with the top of the upstand, glass, aluminium angle trim and setting blocks should be used. Sealants used should be compatible with Dowsil 3363. Dowsil 791 low modulus weather proofing silicone and Dowsil 895 Structural sealant are compatible with Dowsil 3363. Some sealant suppliers may require primer to be applied to surfaces. Recommended lift per person is 25kg. We recommend arranging equipment and installation after the item has been delivered. Unfortunately, we can only deliver this product to the locations below. London, Essex, Kent, East Sussex, West Sussex, Hampshire, Gloucestershire, Surrey, Buckinghamshire, Oxfordshire, Middlesex, Hertfordshire, Bedfordshire, Northamptonshire, Leicestershire, Warwickshire, West Midlands, Nottinghamshire, Suffolk, Derbyshire, Cardiff, Cambridgeshire, Devon, Somerset, East Riding, Lincolnshire, Norfolk, Cheshire, Merseyside, Greater Manchester, south Yorkshire, Staffordshire, Rutland, Wiltshire, Worcester, Herefordshire, West Yorkshire (BD, LS, WF, HX, HD), Dorset. CM, CO, CR, CT, CV, DA, E, EC1, EN, GL, GU, HA, HP, IG, KT, LE, LU, ME, MK, N, NN, NP, NW, OX, PE, RH, RG, RM, SG, SL, SN, SM, SE, SO, SP, SW, PO (exc Isle of White), TN, TW, B, BH, BN, BR, BS, W, WD, WS, WV, UB, AL, BA, WC1, IP, NG, CB, CF, DE, LS, WF, HX, HD, BL, CH, CW, DN, DT, DY, EX, HD, HR, HU, HX, L, LN, LS, M, NR, OL, S, SS, SK, ST, TA, TF, WA, WF, WN, WR, BD1, BD10, BD15, BD13, BD14, BD12, BD11, BD19, BD2, BD3, BD4, BD5, BD6, BD7, BD8, BD9, BD16, BD17. For deliveries outside of this area please see all other products on our website which we can deliver nationwide. Please ensure you check we’re able to deliver to your postcode before proceeding. Only orders that have not yet been dispatched can be cancelled. If the order has already been dispatched we will not be able to cancel. This item is in the category “Home, Furniture & DIY\DIY Materials\Windows & Window Hardware\Home Windows”. The seller is “roof-lanterns-and-rooflights” and is located in this country: GB. This item can be shipped to United Kingdom.

• roof window size: 1000 x 1000mm
• Window Style: Glazed
• Brand: Roof Windows & Skylights
• Unit Type: Unit
• Float Glass Manufacturer: Pilkington K Glass
• Custom Bundle: No
• Main Colour: Clear with black boarder
• Material: Toughened Glass Skylight
• MPN: 222569063615
• Country/Region of Manufacture: United Kingdom
• Unit Quantity: each
• Modified Item: No

]]> https://skylightroofwindow.com/skylights-rooflights-roof-lanterns-uk-made-warranty-db-glazed/feed/ 0 https://skylightroofwindow.com/skylights-roof-lanterns-rooflights-flat-roof-windows-uks-leading-supplier/ https://skylightroofwindow.com/skylights-roof-lanterns-rooflights-flat-roof-windows-uks-leading-supplier/#comments Sun, 25 Sep 2022 18:24:48 +0000 https://skylightroofwindow.com/skylights-roof-lanterns-rooflights-flat-roof-windows-uks-leading-supplier/











Skylights for Flat roofs. The size we advertise is the bottom pane (visible size) and our top pane of glass is 100mm bigger all around. TGS Skylights unlike other sellers which may be offering cheaper products that do not comply to ALL standards below, the flat roof light system we sell conforms to BS EN 12150, BS EN 1279. Unlike some of our competitors, this stepped rooflight system once installed as per our fitting guide has been through independent RVA accredited testing and met the requirements for Air Permeability (EN12207) and Water Tightness (EN12208). Independent test report can be issued to verify this if required by building control. Complying to such standards ensures quality of materials and best practice processes are in place for manufacturing which results in a longer lasting higher quality product. TGS Skylights are perfect for visually expanding areas such as hallways, stairwells, and other closed-in dark spaces that can be transformed with daylight and sky views. Our high quality skylight roof light for flat roofs is constructed with durable toughened glass. The skylight roof glass has excellent thermal properties. For a start it lets in twice as much light into your space compare to same sized vertical windows. Though it allows plenty of heat into your space, it does not lose the heat, keeping your surroundings nice and warm. Fitting and measuring guide. Please see summary below, further detailed fitting instructions will be sent once order is placed. The first step in purchasing your Stepped Insulated Glazed Unit (IGU) would be to measure the structural opening where the stepped unit will be installed. You should allow for 5mm tolerances all around to allow the bottom pane of the Roof Light Stepped Unit to fit smoothly into the opening. For standard units the top pane would have a black 100mm overhang all around on the top pane. This would make the overall size of the top pane 1200mm by 1200mm in this example. PLEASE NOTE SIZES IN THIS PARAGRAPH ARE FOR GUIDANCE ONLY. The Stepped double glazed rooflight supplied can be installed directly on the Upstand supported by a anodized aluminium angle trim all around. Apply adequate compatible low modulus silicone as per silicone supplier’s data sheet to the top of the Upstand firmly placing the stepped unit onto the upstand. Pressure should be applied all around the 100mm overhang to ensure the silicone spreads and seals any gaps and then finish off the silicone all around with silicone tool. Once cured apply structural silicone as per supplier’s data sheet to the bottom aluminium frame flat surfaces firmly fitting the support frame in place. Excess silicone should then be wiped away with a finishing tool. Sealants compatible with the top of the upstand, support frame, setting blocks, glass and the stepped unit primary sealant should be used. Some sealant suppliers may require primer to be applied to surfaces. Please note all Stepped Units are made to order and sizes cannot be changed once glass is cut or toughened. We recommend the speciation, sizes and instructions are reviewed and understood by the installer before proceeding with and order. The rooflight Stepped Insulated Glazed Units (IGU’s) we supply are suitable for single storey flat roof extensions to existing residential dwellings. As each project can vary with requirements, we suggest confirming building regulation requirements for the product with the architect, builder or building officer prior to placing an order to ensure compliance. The installer should undertake a risk assessment. For example, it may need to be obscure, triple glazed, bigger upstand, suitable for walking on, laminated glass, etc. The upstand, bottom angle trim and silicone is not supplied, the builder or roofer should supply this. All our glass items are delivered using specialist glazing vehicles. To offer best rates on our products drivers arrive alone and labour would need to be available on site to off load from the vehicle. We recommend having glass suckers on site for heavy items to support off loading and installation. In the past we use to package items but weeks down the line if items were damaged on site there was no way of establishing if the customer caused the damaged or whether it was in transit. B, BH, BN, BR, BS, CM, CO, CR, CT, CV, DA, E, EC1, EN, GL, GU, HA, HP, IG, KT, LE, LU, ME, MK, N, NN, NP, NW, OX, PE, RH, RG, RM, SS, SG, SL, SN, SM, SE, SO, SP, SW, TN, TW, W, WD, WS, WV, UB, AL, BA, WC1, IP, NG, CB, CF, DE, LS, WF, HX, HD, BL, CH, CW, DN, DT, DY, EX, HD, HR, HU, HX, L, LN, LS, M, NR, OL, S, SK, ST, TA, TF, WA, WF, WN, WR, BD1, BD10, BD15, BD13, BD14, BD12, BD11, BD19, BD2, BD3, BD4, BD5, BD6, BD7, BD8, BD9, BD16, BD17, PO exc I. Sign up to our newsletter for special offers and discounts. This item is in the category “Home, Furniture & DIY\DIY Materials\Windows & Window Hardware\Skylight & Roof Windows”. The seller is “tgs_skylights” and is located in this country: GB. This item can be shipped to United Kingdom.

• INSIDE SIZE – Visible Glass: 1000mm x 2000mm
• Type: Roof Window
• Features: Argon Gas Insulated, Glazed
• Window Style: Fixed Window
• Brand: Toughened Glass Systems – TGS Skylights
• Interior Colour: Clear

]]> https://skylightroofwindow.com/skylights-roof-lanterns-rooflights-flat-roof-windows-uks-leading-supplier/feed/ 0 https://skylightroofwindow.com/fixed-rooflights-roof-windows-flat-roof-lanterns-skylights-various-sizes/ https://skylightroofwindow.com/fixed-rooflights-roof-windows-flat-roof-lanterns-skylights-various-sizes/#comments Thu, 30 Sep 2021 06:51:11 +0000 http://skylightroofwindow.com/fixed-rooflights-roof-windows-flat-roof-lanterns-skylights-various-sizes/










DUPLUS FIXED ROOFLIGHT – STOCK SIZES. Duplus Established 1957, with over 60 years experience in design, manufacture and production of rooflights & roof glazing. Contemporary state of the art structurally bonded fixed glass skylight / rooflight / roof window with a seamless slimline perimeter frame giving uninterrupted views. Built In The UK. Our products are manufactured at our factory in Leicester, UK. We use the highest level of aulity and materials to produce leading edge rooflights. Structurally Bonded: Duplus fixed rooflights are structurally bonded to give exceptional strength, rigidity and seamless appearance which results in a completed product delivered to site that is very easy to install. Thermal Performance: Our rooflights have outstanding thermal performance with U values as low as 1.1 W/M2K. Powder Coated Aluminium: The extruded aluminium perimeter frame is powder coated dark grey (RAL 7016 Matt). Toughened & Heatsoaked Glass: 28mm double glazed TOUGHENED & HEATSOAKED units incorporating the latest Low E coating, warm edge spacer bar and argon filled cavity. These high performance units offer lower overall weight and consequently easier installation than some alternatives. 5m Maximum Height: Our rooflights are suitable (as defined in BS5516-2:2004) up to a maximum height of 5m above floor level. Great Replacements: Products are suitable as replacement rooflights and for new build projects. Easy To Install: Install directly onto your weathered upstand and screw fixed through the side of the frame into your kerb. Custom Options: All products are also available in bespoke sizes to suit your individual requirements. Leicester Made: All fixed rooflights are manufactured at our UK premises in Leicester. Various Styles Available: We also provide Pyramid, Roof Lanterns, Octagonal, Sliding Opening, Shaped Fixedlights, Ridgelights and Opening skylights in bespoke sizes. Visit Our Showroom: Showroom open at our Leicester head office. Please call Gavin on 0116 2582 834 for opening times and to arrange a visit. Visit Our Website: We offer alternative products and specifications. The item “Fixed Rooflights Roof Windows Flat Roof Lanterns Skylights Various Sizes” is in sale since Wednesday, September 29, 2021. This item is in the category “Home, Furniture & DIY\DIY Materials\Windows & Window Hardware\Skylight & Roof Windows”. The seller is “duplusarchitecturalsystemsltd1957″ and is located in Leicester. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Style: Modern
• Exterior Colour: Grey
• Glazing Type: Double-Pane
• Type: Roof Window
• Features: Argon Gas Insulated
• Glass Type: Heat Soaked Tempered Glass
• Frame Material: Aluminium
• Window Style: Fixed Window
• Brand: Duplus
• Manufacturer Warranty: 10 Years
• Interior Colour: Grey

]]> https://skylightroofwindow.com/fixed-rooflights-roof-windows-flat-roof-lanterns-skylights-various-sizes/feed/ 0