March 3, 2021
Thermolight Skylight Flat Roof Lantern Glazed 2000mm x 1000mm
This is a brand new window that is the wrong size for our upstand due to a mistake from our carpenter so having to sell to fund a new window at the right dimensions. Thermolight Skylight Flat Roof Lantern Glazed 2000mm x 1000mm. Top Outer Pane – 6mm softcoat toughened with 100mm black border. Cavity – 18mm spacer bar with argon gas filling. Inner Bottom Pane – 4mm softcoat toughened. Overall 1.2 u value. We recommend that you fit your thermolight roof light on a gradient of 40mm in 1000mm to allow any surface water to run off. Prior to fitting your thermolight roof light your on site joiner will need to form a timber kerb up stand 70mm w x 150mm h leaving a clear opening between the timbers set in by 100mm from size of the roof light you order eg 1000mm x 200mm rooflight set the internal of the timbers to 800mm x 1800mm. Our thermolight roof light has a 100mm overhang on all 4 sides to fully cover and overhang the top face of the timber kerb up stand. Your chosen roof covering (rubber, GRP or felt) should be applied to your roof, up and over the top face of your timber kerb up stand prior to fitting the roof light. Once complete you can commence fitting. Apply suitable glazing silicone to the top of the timber kerb up stand without compromise. Bed down your thermolight roof light on the silicone beads with equal pressure ensuring no air bubbles are left. Fit a timber baton support internally under the inner pane as shown in the image. The item “Thermolight Skylight Flat Roof Lantern Glazed 2000mm x 1000mm” is in sale since Monday, March 1, 2021. This item is in the category “Home, Furniture & DIY\DIY Materials\Windows & Window Hardware\Skylight & Roof Windows”. The seller is “domdom1605″ and is located in Bishops Stortford . This item can’t be shipped, the buyer must pick up the item.
- Features: Glazed
- Brand: Thermolight
- Frame Material: Glass
- Type: Roof Window