April 10, 2025
Flat Roof Skylight Lantern Window Triple Glazed Roof Glass Light Fixed Rooflight
Every skylight comes with 6mm toughened safety glass (U-value: 0.7 W/m²K) for exceptional durability, compliant with BSEN1279 standards. Equipped with argon gas and thermal super spacer technology for enhanced thermal insulation and light transmission. Adds a contemporary flair to your décor while maximizing natural light. Designed for those with DIY experience, these skylights seamlessly integrate into both flat and pitched roofing systems, making them suitable for various roofing projects. As quoted in the product title. Triple glazed with the following layers. 6mm toughened safety glass (or 8mm, depending on skylight dimensions). 4mm thermally toughened glass (or 6mm, depending on skylight dimensions). 44.5 Low E; 6mm toughened glass. 5.19 (51.9%). Clear tint with self-cleaning properties. Suitable for up to 45 degrees. Enhanced by argon gas filling. 16.2% (inside), 15% (outside). Designed for quick and seamless installation. Strong, secure, and long-lasting. Installation Guide and Video. Detailed, step-by-step instructions included. Available for visual guidance. Please note that the. Is only valid when. The bottom pane of glass is supported by timber battens according to the installation guide. British Standards & Building Regulations. CE-marked, ensuring compliance with EU directives and standards. Certified toughened glass, in line with BS EN 12150 standards. Any cracks in the glass must be reported within. To qualify for a return or replacement. Covers the seal of the unit. However, this is only valid if Structural Glazing Tape is used and the bottom pane is supported by timber battens as per the installation guide. Installation Guidelines and Best Practices. Measurement of Internal Dimensions and Structural Opening. The quoted size is the. For installation, the structural opening should be. 10 mm wider and longer. Than the skylight e. A 1000 x 2000 mm skylight requires a 1010 x 2010 mm opening. Upstand Framework Construction Tips. 4 x 2 inch timbers. For the upstand and. 2 x 1 inch or 2 x 2 inch timber battens. Along the inside, where the bottom glass pane rests. Ensure the upstand has a. (10 cm per linear meter of skylight) to avoid water pooling. For example, a 1000 x 2000 mm unit requires one end of the upstand to be 10 cm higher if pitched on the short side. Along the timber batten to ensure even weight distribution. Generously along the upstand to fully seal the skylight and protect it from the elements. Silicone or polyurethane sealants. Avoid acrylic sealants, which can chemically react and compromise the unit’s seal.