September 30, 2022

Flat Roof Skylight Rooflight Postage for our existing Panotrade customers

Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
Flat Roof Skylight Rooflight Postage for our existing Panotrade customers

Flat Roof Skylight Rooflight Postage for our existing Panotrade customers
This listing is for our existing Panotrade customers. Also available is our discount voucher. Fill your house with natural light! Panotrade prides itself on its unique, original design and simple installation process. Once in place, cased within our easy fit timber kerb, the glass is completely seamless and is 100% water tight, preventing any accumulation of moss or mould, as is the problem with many other designs on the market. This unit has an excellent. (a measure of heat transmission through a window). Building regulations stipulate the U-Value must be under 1.5. W/m²K, with lower numbers indicating better insulating properties. Panotrade’s roof-lights are one of the most efficient on the market! CONTEMPORARY DESIGN WITH LEADING THERMAL PROPERTIES. The Panotrade roof-light is the only true seamless glass roof-light. Is designed in such a way, that unlike most roof-lights, which have an aluminium kerb, it has no joints anywhere, just a seamless piece of glass. Once fitted, your timber upstand / kerb will be fully encapsulated on all sides, so just like the roof joists, it can not be seen, whether you are using a felt or fibreglass roof covering. When covering the roof with fibre-glass, (GRP), EPDM rubber sheeting. Or a felt based finishing, run along the roof, covering horizontally and then move up vertically along the base of the skylight and level to the top of the up-stand and kerb. It is important not to overlap the top edge, keep this wood bare for the silicone to be applied later. Once the skylight is placed into position, the wooden up-stand will be totally encapsulated, rendering the framework invisible. Internally, you fix a plasterboard stop bead approximately 5mm below the bottom pane of glass. Next, run your plasterboard reveal all around, again rendering all framework invisible. The stepped skylight is then bonded into the kerb with a good low modulus glazing silicone. We suggest using at least one tube for every linear metre, applying copious amounts on the top edge and into the rebate. Remove the skylight from its crate and lower into the aperture, applying gentle pressure so the silicone is squeezed out. It is vitally important there are no’pin holes’, where water may ingress. When installed, the external visible glass, (the black edge border), overhangs the kerb for rain water run off. To allow water to run off the glass, we suggest you create a gradient of 50mm for every linear 1000mm, (minimum 3 degrees, preferably 5 degrees), run in line with the fall of your roof. This also enables the self cleaning glass agent to work efficiently and to ensure there will be no’pooling’ of water forming in the middle of the skylight. A simple water test is suggested before you bond in the unit. HOW SELF CLEANING GLASS WORKS. External window cleaning and maintenance has been simplified by the abundance of glass cleaning agents on the market. However, these glass cleaning agents still require sufficient elbow grease to get your windows looking great. The self cleaning Range: A Two Step Cleaning Process. After years of development, the world’s first self-cleaning glass to use a microscopic coating with a unique dual-action. The first stage of the cleaning process is “photo-catalytic”. In this stage the coating reacts with daylight to break down organic dirt. The second stage is “hydrophilic”. Here, instead of forming droplets, rainwater hits the glass and spreads evenly, running off in a “sheet” and taking the loosened dirt with it, also drying quickly without leaving streaks. If the thought of spending endless hours cleaning windows puts you off building a new conservatory or installing skylights then self-cleaning glass is precisely what you need. The U value (W/m2K) is the thermal transmittance of a building element (wall, roof, floor or window). It includes the thermal resistances of all layers (including air cavities) and surfaces resistances at both surfaces of the element. The surfaces resistances account for both convective and long wave radiation between the element surface and the surroundings. The U value is the heat flow Q (W) through the whole area of the element divided by the total area of the element and temperature difference between external and internal environments. It is, therefore, used in building energy calculations i. SAP, SBEM to estimate the total heat loss through the building fabric. Mean you will never have to clean your Panotrade Skylight. Routine Maintenance of self cleaning glass. Normal weather with daylight and occasional rain will keep the coating activated and self-cleaning. Small particles of organic dirt can be observed while they are being broken down by the faint halo around the original dirt spot. Typically the dirt spot and associated halo will disappear in a week or so without any manual intervention. Ideally the coating should be allowed to remove any surface dirt by its own self-cleaning action. If faster cleaning is required then the manual processes described below can be used. Extended dry periods will continue to break down and evaporate organic dirt but will allow an accumulation of inorganic particles to form, particularly in dusty areas such as facing a dirt road or a salted highway in winter. To remove deposits such as dust, salt, or large lumps of bird droppings which can take excessive amounts of time to break down, the glass can be simply hosed down with clean water. Start the action at the top of the window and spray the water back and forth, working downwards towards the bottom of the window. This will flush the dirt away from the clean areas. Allow the glass to dry naturally. No rubbing or squeegee action should be required. This item is in the category “Home, Furniture & DIY\DIY Materials\Windows & Window Hardware\Skylight & Roof Windows”. The seller is “panotrad7″ and is located in this country: GB. This item can be shipped to United Kingdom.
  • postage charge: £95
  • Special Features: Argon Gas Filled / Self Cleaning / Low U-Value
  • Triple Glazed Make-Up: 6mm tough 4mm tough 4mm tough
  • Sizes Quoted Represent: Internal Visible Size / Aperture
  • Unit Weight: 50Kgs Per M²
  • Skylight Style: Fixed, (non-opening), Skylight
  • U-Value (Energy Rating): 0.83 W/m²K
  • Application of Use: For Flat and Pitched Roofs
  • BS Approved: BS 12150 – Toughened Safety Glass
  • Energy Efficiency Rating: A++
  • Safety & Security Features: 6mm Toughend outter
  • Self-Cleaning: Coated with Active™ Self-Cleaning Agent
  • Noise Reduction: Triple Glazed, Argon Gas Filled Unit Noise Filter
  • Silicone Sealed: Prevents Condensation and Misting within Unit
  • D.I.Y.: Easy To Install – Installtion Guide Provided
  • Eco-Features: Excellent Thermal and Noise Reduction Qualities.
  • Main Colour: Clear (Blue Tint Available)
  • Express Delivery: 2-3 Days Available Upon Request
  • Glass Type: Laminated, Triple Glazed, Low-E Soft Coated Glass
  • Window Style: Fixed Window
  • Brand: Panotrade
  • Style: Fixed Roof-Light Skylight
  • Glazing Type: Triple-Pane
  • Features: Argon Gas Insulated, Glazed
  • Frame Material: Wood
  • Room: Any Room
  • Interior Colour: Clear

Flat Roof Skylight Rooflight Postage for our existing Panotrade customers